China Best Single Pallet Rack Factory & Exporter Serving the Netherlands Market

Yes. Under European standard NEN-EN 15512:2020, structural calculations are based on the actual yield point ($R_e$), tensile strength ($R_m$), and elongation ($\delta$) of the raw material, rather than its geographic origin. Q235B has a guaranteed minimum yield strength of 235 MPa, chemically and mechanically matching S235JR under EN 10025-2. Q355B matches S355JR with a 355 MPa minimum yield. Every production batch at HEDA Shelves is accompanied by original EN 10204 Type 3.1 mill test certificates verifying exact mechanical chemistry.

For standard Euro Pallets (800×1200 mm, handled on the 800 mm face), we manufacture 2,700 mm clear entry beams to accommodate three pallets with 75 mm clearance between pallets and 100 mm upright clearances, as mandated by safety regulations. For four Euro pallets, a 3,600 mm beam is specified. For Dutch Industrial / Block Pallets (1000×1200 mm), we provide 3,300 mm beams for three pallets or 2,200 mm for two pallets. Standard upright depth for single-deep Euro storage is precisely 1,100 mm, leaving a safe 50 mm front and rear pallet overhang.

Racking components are classified under EU Harmonized System (HS) code 7308.90.98 (Other structures and parts of structures of iron or steel). Shipments departing our Guangzhou or Shenzhen facilities arrive at the Port of Rotterdam (ECT Delta / APM Terminals) within 28 to 35 days. We provide all necessary documentation: Bill of Lading, Commercial Invoice, detailed Packing List segregated by container number, Certificate of Origin, and CE Declaration of Performance. Dutch importers can utilize standard Article 23 reverse-charge VAT mechanisms.

In Dutch distribution centers constructed on pile-supported concrete slabs, concentrated point loads from upright frames (often exceeding 100 kN to 220 kN per upright column) can cause punch shear failures or localized hairline cracking in the unreinforced topping. We supply heavy-gauge engineered baseplates (up to 200×200×12 mm) with dual or quadruple anchor holes. This increases the load contact area, maintaining compressive stress on the slab well beneath the C28/35 or C35/45 concrete crushing threshold.

Yes. To satisfy Dutch PGS 15 mandates, single pallet racks storing chemical containers or aerosol cans must incorporate fire containment and spill safety provisions. We engineer structural upright frames with pre-punched slots to accommodate heavy galvanized drop-in spill containment sumps (lekbakken), heavy-gauge anti-drop wire mesh backsplashes (achterwandgaas), and dedicated intermediate sprinkler pipe brackets, enabling your facility to secure municipal environmental permit approval.

Every shipment includes complete CAD assembly schematics, component identification maps, tightening torque tables for anchor bolts, and load rating signage (belastingborden) complying with NEN-EN 15635 in Dutch and English. Dutch clients typically employ certified local VCA-certified installation contractors who assemble the interlocking beam-and-connector frames with remarkable speed. For major logistics projects exceeding 5,000 pallet positions, HEDA can dispatch bilingual site engineers to oversee installation.